We help the world growing since 2013

The Advantages Of Polyurethane High Pressure Spraying Machine Equipment

The working principle of the polyurethane high pressure spraying machine is to transfer AB’s two-component polyurea coating to the inside of the machine through two independent and efficiently heated lift pumps for atomization by ultra-high pressure spraying.

The advantages of polyurethane high pressure spraying machine equipment:

1. The material has good flexibility, high strength, corrosion resistance and aging resistance

2. The coating quality is good, the coating is smooth and delicate, and there is no brush marks. By spraying the paint under pressure into fine particles and distributing them evenly on the wall, latex paint creates a smooth, smooth and dense coating with no brush marks or rolling marks on the wall.

3. The thickness of the coating film is uniform, and the usage rate of the coating is high. The thickness of the artificial brush roller is very uneven, generally 30-250 microns, and the coating utilization rate is low, and it is easy to obtain a 30 micron thick coating by airless spraying.

4. High coating efficiency. The spraying efficiency of single work is as high as 200-500 square meters per hour, which is 10-15 times higher than manual brushing.

5. Easy to reach corners and blanks. Because high-pressure airless spray is used, no air is included in the spray, so the paint can easily reach corners, crevices, and uneven areas that are difficult to brush on. In particular, it is suitable for ceilings in offices, which often have ducts and fire extinguishing pipes for air conditioning.

3H spray machine

6. Good adhesion and long coating life. It uses a high-pressure spray to force the atomized paint particles into a powerful kinetic energy. The paint particles use this kinetic energy to reach the pores, making the coating more dense, enhancing the mechanical bond between the coating and the wall, and improving the adhesion of the coating. , effectively prolong the service life of the paint.

7. The coating of the polyurethane high-pressure spraying machine is dense and continuous. There are no joints, and the protective performance is very outstanding;

8. Organically combine material protection and spraying technology to greatly improve the quality and progress of the project;

9. Polyurethane high-pressure sprayer can spray high-viscosity paints, but hand brushing, air spraying, etc. are only suitable for low-viscosity paints. With the development of the economy and the change of people’s ideas, it has become popular to use good interior and exterior wall paints instead of mosaics and tiles to decorate the walls. Water-based latex paints are becoming non-toxic, easy-care, colorful and environmentally friendly, making them a popular interior and exterior decoration.


Post time: Aug-21-2022